Need assistance? Talk to an Expert! Call Now Or Chat With Us!
✅ Free Shipping On Most Orders
✅ No Sales Tax (Except NV)
✅ Exceptional Customer Service
✅ Call (800) 583-0045 Or Chat With Us to get the lowest price!
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Breezaire WKSL Series 265 cu. ft. Cooling Unit Wine Fridge WKSL 2200 Overview
WKSL 2200 is a direct replacement for WKS 2200.
Breezaire WKSL Series cooling systemsare special split systems that allow mounting of the cooling (evaporator) module in the enclosure to be cooled and the exhaust (condenser) module as far as 50 feet away. They are designed - when installing in a properly constructed enclosure - to provide a constant selectable temperature between 48°F and 63°F while maintaining 50% to 75% relative humidity.
*Professional installation skills and equipment required.
Breezaire WKSL 2200is designed for easy installation by any, properly equipped with compressor wine coolersystem, qualified air conditioning or refrigeration service technician. Two copper tubes connect the two modules and power is hard wired to the units using an adequately sized 110 AC volt electrical source. These Breezaire systems must be charged with refrigerant during installation. The WKSL series uses Breezaire's rugged adjustable mechanical thermostat.
HUMIDITY & INSTALLATION:By the nature of their operation, Breezaire wine cellar cooling units will maintain a stable humidity level, lower than the relative ambient humidity. In situations where the ambient humidity is high, the compressor wine cooler unit will lower the humidity to desirable storage levels. In situations where the ambient relative humidity is very low, the desired enclosure relative humidity may not be achieved without adding moisture. To add moisture to the enclosure only use slow, natural evaporation from a small porous water container. Do not use a humidifier.
TEMPERATURE & INSTALLATION:These wine cellar cooling units are designed to cool 25°less than the ambient temperature of the venting side of the unit. In some cases, improper placement or installation may cause the unit's performance to be degraded. The condensing unit must have a constant supply of fresh air, less than 85°F. If the condensing unit is located in a confined area with poor ventilation, the unit will not be able to reject the heat it is removing from the enclosure and a malfunctioning unit will be suspected, even though the unit is mechanically sound. Call us to discuss your installation concerns.
Available in WKSL 2200 for 265 cu.ft. wine cellar andWKSL 4000for 1000 cu.ft. wine cellar.
Features:
Adjustable Temperature-Breezaire wine cooler unit includes an adjustable thermostat. The ideal temperature for storing and aging wine is between 50°F and 60°F.
Automatic Humidity Control- Humidity must be present in the wine cellar to prevent cork and label deterioration. The gentle cooling action of the system maintains the relative humidity in the 50% to 75% range. (Additional moisture may be required in extremely dry climates.)
Vibration Control- Breezaire cooling systems are engineered to control vibration by dampening mounts throughout the cooling system.
Ultra-Quiet Operation- Breezaire cooling units perform their task quietly and unobtrusively to preserve the atmosphere of isolation from the outside world that makes a visit to a wine cellar a unique experience.
Attractive Metal Cabinet- An attractive metal cabinet that blends in with the décor of your cellar area and can be flush mounted to any wall.
Ease of Installation - No plumbing, complicated wiring, or special procedures including the on-site installation of refrigerant are required.
Uncompromising Quality -Breezaire wine coolers are designed to deliver superior performance.
Comprehensive Warranty Coverage- Owners enjoy the security of warranty coverage that reflects Breezaire ’s high standards.
Dimensions (H x W x D):Fancoil: 14.125" x 14.125" x 7.75" | Condenser: 14.125" x 14.125" x 11"
Capacity: Up to 265 cu. ft.
High-Temperature Alarm: Yes
Electronic Controls: Yes
Humidity Control: Yes
Digital Temperature Display: Yes
Refrigerant: R-134a
Electrical Requirements: 110 V / 60 Hz
Weight: Fancoil: 25 lbs | Condenser: 35 lbs
Need assistance? Talk to an Expert at +1 (800) 583-0045
or email support@luxuryappliancesdirect.com to get the best-suited wine cooling system for your needs.
Sentry III+ control system
Sentry III+ control system offers the following features:
Each Breezaire Wine Cellar Unit comes equipped with Breezaire's Sentry III digital electric control system, which includes a control panel with an easy to read, green LED display.
Walk Through of Breezaire Sentry lll Control System
Large, easy to read, cool green display.
Accurate, easy to adjust temperature set points with continuous display of cabinet temperature.
Power outage protection.
Blocked airflow protection, which shuts down the unit and protects wine in case of high temperatures caused by condenser blockage or fan failure.
Controls temperature by enclosure (cellar) air sensors or optional bottle probe.
WKSL series uses the Sentry III+ digital control system for complete control of the enclosure conditions.
Product Video
GET TO KNOW BREEZAIRE WKSL SERIES WINE CELLAR COOLING SYSTEM
Bottle Probe (OPTIONAL)
BOTTLE PROBE (OPTIONAL)
The Breezaire Bottle Probe can be used on all models. The bottle probe is used when you want to control the temperature of the wine cellar according to the liquid in the bottles. When the bottle probe is plugged into the unit it will take place of the internal air sensor.
How to use the Bottle Probe:
Allow the enclosure to stabilize at the desired temperature for several days (72hours). Using a normal size wine bottle clean the bottle and then fill it with water insert the bottle probe into the bottle, and place it in the enclosure. Do not connect the bottle probe to the unit until the bottle has sufficient time to cool to the enclosure temperature (72 hours). Connect the bottle probe to the outlet located on the face of the unit. The on and off operation of the unit is now controlled by the temperature of the liquid in the bottle. The temperature displayed is that of the liquid in the bottle. Unplugging the bottle probe will return the unit to the internal air sensor and will be reading the wine cellar temperature. The bottle probe cord is 5’ long.
By buying from us you qualify for the full manufacturer warranty, save time and money!
We ship directly to your door from the manufacturer's warehouse.
